Initialize Network Trace
Before commencing with a trace operation, the network connectivity model must be initialized by selecting the network, selecting the stop conditions, and clicking the Initialize button.
For the Electric Industry Data Model, the following networks options are pre-configured for tracing:
For the Electric Primary trace option, the following stop conditions are pre-configured:
- None - no stop conditions
- Default - stops at:
- Switch Cabinet Fused Switch, Switch Cabinet Group Switch, Fuse Bank, OH Recloser Bank, OH Regulator Bank, OH Sectionalizer Bank, OH Switch Bank, OH Step Transformer Bank, and UG Step Transformer Bank features with an operating status property that does not contain a value 'C'
- all OH Primary Open Point and UG Primary Open Point features
- A Phase - stops at:
- Switch Cabinet Fused Switch and Switch Cabinet Group Switch features with an operating status property that does not contain a value 'C'
- Fuse Bank, OH Recloser Bank, OH Regulator Bank, OH Sectionalizer Bank, OH Switch Bank, OH Step Transformer Bank, and UG Step Transformer Bank features with an operating status property that does not contain a value 'C' and a phase property that does contain value 'A'
- all OH Primary Open Point and UG Primary Open Point features
- UG Primary Splice, UG Primary Splice Box, OH Primary, UG Primary, and OH Primary Jumper Bank with a phase property that does not contain value 'A'
- B Phase - stops at:
- Switch Cabinet Fused Switch and Switch Cabinet Group Switch features with an operating status property that does not contain a value 'C'
- Fuse Bank, OH Recloser Bank, OH Regulator Bank, OH Sectionalizer Bank, OH Switch Bank, OH Step Transformer Bank, and UG Step Transformer Bank features with an operating status property that does not contain a value 'C' and a phase property that does contain value 'B'
- All OH Primary Open Point and UG Primary Open Point features
- UG Primary Splice, UG Primary Splice Box, OH Primary, UG Primary, and OH Primary Jumper Bank with a phase property that does not contain value 'B'
- C Phase - stops at:
- Switch Cabinet Fused Switch and Switch Cabinet Group Switch features with an operating status property that does not contain a value 'C'
- Fuse Bank, OH Recloser Bank, OH Regulator Bank, OH Sectionalizer Bank, OH Switch Bank, OH Step Transformer Bank, and UG Step Transformer Bank features with an operating status property that does not contain a value 'C' and a phase property that does contain value 'C'
- All OH Primary Open Point and UG Primary Open Point features
- UG Primary Splice, UG Primary Splice Box, OH Primary, UG Primary, and OH Primary Jumper Bank with a phase property that does not contain value 'C'
- Isolation Trace - stops at:
For the Electric Secondary trace option, the following stop conditions are pre-configured:
- None - no stop conditions
- Default - stops at all OH Primary Open Point and UG Primary Open Point features
For the Electric Structural trace option, the following stop conditions are pre-configured:
For the Conduit Network trace option, the following stop condition is pre-configured: